ESAB Exaton Ni59 1.0mm X 15kg
Dodání za 6 dní
Kód: 41189882
| Cena s DPH: | 7 136,58 Kč |
| Sleva: | 8% |
| Jednotková cena bez DPH: | 5 426,16 Kč / kg |
| Jednotková cena s DPH: | 6 565,65 Kč / kg |
| Množstevní slevy: | |
| 15% sleva | (od 150 kg) |
| Celková cena bez DPH: | 5 426,16 Kč / kg |
| Celková cena s DPH: | 6 565,65 Kč / kg |
Popis produktu
NIKL A JEHO SLITINY
MIG/MAG/TIG (SVAOVACÍ DRÁTY)
Exaton Ni59 (GMAW)
esab.com/pídavnésvaovací materiály
Exaton Ni59 is a versatile alloy with excellent wet corrosion resistance for the most demanding applications. It combines excellent corrosion resistance in oxidizing
and reducing media, has excellent resistance in chloride containing media and to localized corrosion environments. Exaton Ni59 has excellent thermal stability
compared to other common nickel alloys and has therefore outstanding resistance to intermetallic precipitation during welding. Applications for Exaton Ni59 are
found in aggressive and contaminated corrosive media including scrubbers for flue gas desulfurisation (FGD), chemical process plants and in severe offshore and
petrochemical environments. Furthermore, Exaton Ni59 can be used in contaminated mineral acid environments such as sulfuric acid, hydrochloric acid, phosphoric
acid, nitric acid etc. Components in sulfuric acid coolers, digesters and bleachers. Chemical, petrochemical, marine, pharmaceutical, energy production and
pollution control. Exaton Ni59 is used for joining matching alloys or dissimilar joining to other nickel alloys such as UNS N10276 (2.4819), type UNS N06022
(2.4602), UNS N06625 (2.4856) and N08825 (2.4858). It provides strong, tough, Nb free weld metal for dissimilar welds in super-austenitic and super-duplex/hyper-
duplex stainless steel joints or combinations of these with nickel alloys. Exaton Ni59 is used for joining and overlay welding with MIG/MAG, plasma and hot wire TIG
and mechanized TIG. Exaton Ni59 is approved in ISO15156/MR0175 (highest test level VII in sour-gas environments).
Specifikace
Klasifikace SFA/AWS A5.14 : ERNiCrMo-13
EN ISO 18274 : S Ni 6059 (NiCr23Mo16)
Werkstoffnummer : 2.4605
Schválení VdTÜV : 09183
VdTÜV : 09184(GTAW)
Schválení jsou založena na umístění závodu. Pro více informací kontaktujte ESAB.
Typ legování Alloyed nickel (Ni + 23 % Cr + 15.5 % Mo)
Ochranný plyn I1 (EN ISO 14175)
Typické vlastnosti v tahu
Podmínky Mez skluzu Mez pevnosti v tahu Prodloužení
Po svaření 470 MPa 760 MPa 48 %
Vrubová houževnatost
Podmínky Testovací teplota Vrubová houževnatost
Po svaření 20 °C 190 J
Po svaření -196 °C 155 J
Typické složení drátu %
C Mn Si S P Ni Cr Mo V Al
0.003 0.20 0.02 0.002 0.003 60.6 22.7 15.5 0.14 0.24
Typické složení drátu %
Cu Ti Co Fe
0.01 0.01 0.01 0.5
MIG/MAG/TIG (SVAOVACÍ DRÁTY)
Exaton Ni59 (GMAW)
esab.com/pídavnésvaovací materiály
Exaton Ni59 is a versatile alloy with excellent wet corrosion resistance for the most demanding applications. It combines excellent corrosion resistance in oxidizing
and reducing media, has excellent resistance in chloride containing media and to localized corrosion environments. Exaton Ni59 has excellent thermal stability
compared to other common nickel alloys and has therefore outstanding resistance to intermetallic precipitation during welding. Applications for Exaton Ni59 are
found in aggressive and contaminated corrosive media including scrubbers for flue gas desulfurisation (FGD), chemical process plants and in severe offshore and
petrochemical environments. Furthermore, Exaton Ni59 can be used in contaminated mineral acid environments such as sulfuric acid, hydrochloric acid, phosphoric
acid, nitric acid etc. Components in sulfuric acid coolers, digesters and bleachers. Chemical, petrochemical, marine, pharmaceutical, energy production and
pollution control. Exaton Ni59 is used for joining matching alloys or dissimilar joining to other nickel alloys such as UNS N10276 (2.4819), type UNS N06022
(2.4602), UNS N06625 (2.4856) and N08825 (2.4858). It provides strong, tough, Nb free weld metal for dissimilar welds in super-austenitic and super-duplex/hyper-
duplex stainless steel joints or combinations of these with nickel alloys. Exaton Ni59 is used for joining and overlay welding with MIG/MAG, plasma and hot wire TIG
and mechanized TIG. Exaton Ni59 is approved in ISO15156/MR0175 (highest test level VII in sour-gas environments).
Specifikace
Klasifikace SFA/AWS A5.14 : ERNiCrMo-13
EN ISO 18274 : S Ni 6059 (NiCr23Mo16)
Werkstoffnummer : 2.4605
Schválení VdTÜV : 09183
VdTÜV : 09184(GTAW)
Schválení jsou založena na umístění závodu. Pro více informací kontaktujte ESAB.
Typ legování Alloyed nickel (Ni + 23 % Cr + 15.5 % Mo)
Ochranný plyn I1 (EN ISO 14175)
Typické vlastnosti v tahu
Podmínky Mez skluzu Mez pevnosti v tahu Prodloužení
Po svaření 470 MPa 760 MPa 48 %
Vrubová houževnatost
Podmínky Testovací teplota Vrubová houževnatost
Po svaření 20 °C 190 J
Po svaření -196 °C 155 J
Typické složení drátu %
C Mn Si S P Ni Cr Mo V Al
0.003 0.20 0.02 0.002 0.003 60.6 22.7 15.5 0.14 0.24
Typické složení drátu %
Cu Ti Co Fe
0.01 0.01 0.01 0.5
Parametry
| Záruka | 24.0 měsíc(ů) |
|---|---|
| Typ použití | niklové |
| Váha cívky drátu do | 15 kg |
| Průměr | 1.2 mm |
| Váha palety | 900 kg |